Melco

This Page Was Last Modified 9/22/05

Home Kit Prices Models Available

Melco Tubular Sizes Available

12cm, 15cm, and 18cm and 22cm old and new style Tubular Hoops
Also called sizes 4.7 , 5.9, 7.1, and 8.3 inch
11x13" Jacket Back
NEW 11"x17" also called 44x30 Jacket Back (for plastic or wood hoop. This fixture must
be ordered for the correct one, it is a different fixture for the plastic and wood)
43x43 wood hoop

IMPORTANT INFO FOR MELCO CUSTOMERS

Melco changed their hoops around 1999. The change only looks minor, but it does effect the way the HoopMaster works. The main change is the addition of the little tab at the top of the outer ring. Also the entire diameter of the inner and outer ring is a little larger on the newer hoops. This change makes it not possible for the HoopMaster to work properly on both styles at the same time. When ordering fixtures for the HoopMaster you will need to know which style you have. You might also want to consider replacing your hoops if you have the older style. There are a few reasons for this. First, If you ever need to replace your hoops or want extra hoops, you will not be able to get the old style anymore. You want to make sure you do not mix styles because you will have to purchase additional HoopMaster fixtures. Second, if you ever need to replace just your outer rings, you will not be able to get the old style rings, and the new style rings do not work on your old style hoops. If you would decide to replace your old style hoops you have a few options. You could, buy new hoops from Melco, or buy after market hoops. Durkee, Hooptech, and Allied, all make hoops that will fit on Melco machines. The other advantage to after market hoops is that you can just change the metal brackets on the hoops if you ever get another brand of machine. This is much cheaper than replacing the entire hoop.

When ordering for Melco, we also need to know how many hoops of each size you have. For example if you are ordering the HoopMaster for two sizes we would need to know how many hoops of those two sizes you have. The reason for this is so that we can send you springs for each of your hoops. The Springs are put in between the two halves of the outer ring to help spread the ring open when loosened. This makes hooping much easier. Below is a picture of were the spring will go.


We want to make sure that you receive the correct HoopMaster for your particular hoops. If you have any questions at all, please give us a call.
Our number is 1-800-900-0741, or 262-257-0930. Our normal hours are M-F 9am to 4:30 Central Standard Time.

 

Please call to order or for additional information

Midwest Products Inc.
W194 N11665 McCormick Dr.
Germantown, WI  53022
Phone 1-800-900-0741 or (262) 257-0930
Fax (262) 257-0934
E-Mail: info@hoopmaster.com

 

E-mail Us